MDM Rhino Shelter Products offers two sizes of heavy duty open sided Steel Carports. Select either the larger 12x20 car size unit or the smaller, shorter 7x10 unit to fit your needs. These units are high quality protection from the effects of sun and weather for cars, trucks, machinery, recreational equipment or just about anything else that requires outdoor protection. The units feature a fabricated pre-drilled frame assembly of heavy square tube steel with all the hardware necessary for easy and instant erection in a matter of minutes. The frame is finished with a heavy powder coated finish of grey. The top roof material is fluted steel sheathing, shipped in pre-cut sheet lengths, with a baked-on neutral color painted finish. The steel panels resist rust, oxidation, or any amount of the sun’s damaging effects. The roof sheets easily attach to the frame assembly with rubber grommeted self-drilling screws at each frame member. Ends and sides are open to allow ventilation around whatever is placed underneath. The outer edge molding pushes directly onto the steel for a permanent, finished, and attractive edge. The base of each frame member is pre-drilled to insert the provided ground anchors. The anchors are 18” long steel pins with a large head, which are suitable to secure the carport to almost any surface. Once assembled, the unit is a permanent structure that will provide many years of protection for your valuable investments
Exclusive Outdoor Storage Shed - Portable Garage Kit Features:
- Heavy Duty Square Steel Frame With Painted Finish.
- Easy Bolt Together Design - all Pre-drilled & Cut
- Rubber Outter-Edge Molding
- Rubber Grommetted Self-Drilling Screws
- Two Box Shipment - easily unloaded and transported (shown right)
- Permanent Anchors Included
| Nominal Size |
7’ Wide x 10’ Long x 6' High |
| Arches |
4' Spacing - 3 Arches
2” Square Steel Frame Members |
| Standard End Door Size |
Center Height - 6'
Sidewall Height - 4' |
| Available Colors |
Gray |
| Shipping Weight |
270 lbs. shipped in two(2) box
Shipped via Motor Freight Only |
| Fire Retardant Standard |
Main Cover & Doors meet CPAI -84 Section 5 |
| Anchors |
Four(4) Stainless Steel 18" Pin Anchors |
More MDM Rhino Shelter Outdoor Storage Shed - Portable Garage Kit Features:
Cover: Made of a 8 oz. industrial grade rip-stop poly that is ultra-violet ray treated on both sides to prevent sunlight from deteriorating the cover. Rip-stop poly means if you get a tear in the cover, the rip will not continue. Only MDM Rhino Shelter outdoor storage shed / portable garage kits fabric is flame resistant and meets California fire code CPAI-84. Many of our customers run heat inside their shelter to keep warm while working in their workshop.
Frame: The frame on your outdoor storage shed - portable garage is made of high quality galvanized structural steel tubing that is designed not to rust. Most other manufacturers powder coat their steel, which is basically a cheap way to cover black raw pipe and make it appear galvanized. Powder coating, once chipped or scratched, may rust within 24 or 48 hours. The storage shed frame is also pre-drilled and is assembled with carriage bolts so that there are no power tools required during assembly. Average installation time on the one car garage kit is 2 hours with two people the first time setting it up. The heavy duty, galvanized steel frame is designed to withstand high winds and snow.
Anchors: We use a cable hook anchoring system to anchor your outdoor storage shed. each anchor is 3 feet long and the cable is made of stainless steel to prevent rusting. Each anchor has a 1200 pound pull out ratio.
Questions: Call us 1 888 814-7531
Whether you need a portable outdoor storage shed or portable garage kit that will last, you can't go wrong with MDM Rhino Shelter.
|
