Search

MDM Rhino Shelter 14' x 42' x 15' RV/Boat Style Portable Garage

To provide the lowest possible price on this item, shipping is added by state shipped to (select state drop down box below)
Manufacturer: MDM
SKU: MDM-PB144215R**
Delivery date: Usually ships within 3 days
$2,899.25
decrease increase

MDM Rhino Shelter outdoor storage shed - Portable Garage kits provide the best in instant and portable protection for any purpose. Typical uses include lawn equipment storage, vehicle protection and storage, equipment/material storage, and workshop areas.

Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with permanent anchor system and one door roll-up kit.

Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with duckbill earth anchors with a 36" stainless steel tether and a drive rod to secure the unit at 6 strategic points. Whether you need a portable outdoor storage shed or portable garage kit that will last, you can't go wrong with MDM Rhino Shelter.


Exclusive Outdoor Storage Shed - Portable Garage Kit Features:

 

Nominal Size 14' Wide x 42' Long x 15' High
Arches Ten (10) on 48” Spacing 2-3/8” Frame Members
Standard End Door Size 12’9" Width x 12'6" Height
8'6" Wide at Top
Available Colors Outer Colors: Forest Green, Grey, or Tan
All Interiors: White Only
Shipping Weight 1043 lbs shipped in Eight(8) boxes Shipped via Motor Freight
Main Cover UV Protected Fabric Backed Poly Material 10 0z. Weight. 22 Mil. Thick.
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Twenty-Two (22) 36” Anchor with U-Bolts & Drive Rod Std.

 

 

Whether you need a portable outdoor storage shed or portable garage kit that will last, you can't go wrong with MDM Rhino Shelter.


More MDM Rhino Shelter Outdoor Storage Shed - Portable Garage Kit Features:

Cover: Made of a 8 oz. industrial grade rip-stop poly that is ultra-violet ray treated on both sides to prevent sunlight from deteriorating the cover. Rip-stop poly means if you get a tear in the cover, the rip will not continue. Only MDM Rhino Shelter outdoor storage shed / portable garage kits fabric is flame resistant and meets California fire code CPAI-84. Many of our customers run heat inside their shelter to keep warm while working in their workshop.

Frame: The frame on your outdoor storage shed - portable garage is made of high quality galvanized structural steel tubing that is designed not to rust. Most other manufacturers powder coat their steel, which is basically a cheap way to cover black raw pipe and make it appear galvanized. Powder coating, once chipped or scratched, may rust within 24 or 48 hours. The storage shed frame is also pre-drilled and is assembled with carriage bolts so that there are no power tools required during assembly. Average installation time on the one car garage kit is 2 hours with two people the first time setting it up. The heavy duty, galvanized steel frame is designed to withstand high winds and snow.

Anchors: We use a cable hook anchoring system to anchor your outdoor storage shed. each anchor is 3 feet long and the cable is made of stainless steel to prevent rusting. Each anchor has a 1200 pound pull out ratio.

Questions: Call us 1 888 814-7531

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design - all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with
  • Bottom Pockets
  • One (1) complete Roll-up Door Kit
  • Protective Plastic Tube End Caps - All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & DoorsTwenty-Two (22) permanent anchors included
  • Five(5) Box Shipment
  • Average install time - 8 to 10 hours

MDM Rhino Shelter outdoor storage shed - Portable Garage kits provide the best in instant and portable protection for any purpose. Typical uses include lawn equipment storage, vehicle protection and storage, equipment/material storage, and workshop areas.

Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with permanent anchor system and one door roll-up kit.

Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with duckbill earth anchors with a 36" stainless steel tether and a drive rod to secure the unit at 6 strategic points. Whether you need a portable outdoor storage shed or portable garage kit that will last, you can't go wrong with MDM Rhino Shelter.


Exclusive Outdoor Storage Shed - Portable Garage Kit Features:

 

Nominal Size 14' Wide x 42' Long x 15' High
Arches Ten (10) on 48” Spacing 2-3/8” Frame Members
Standard End Door Size 12’9" Width x 12'6" Height
8'6" Wide at Top
Available Colors Outer Colors: Forest Green, Grey, or Tan
All Interiors: White Only
Shipping Weight 1043 lbs shipped in Eight(8) boxes Shipped via Motor Freight
Main Cover UV Protected Fabric Backed Poly Material 10 0z. Weight. 22 Mil. Thick.
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Twenty-Two (22) 36” Anchor with U-Bolts & Drive Rod Std.

 

 

Whether you need a portable outdoor storage shed or portable garage kit that will last, you can't go wrong with MDM Rhino Shelter.


More MDM Rhino Shelter Outdoor Storage Shed - Portable Garage Kit Features:

Cover: Made of a 8 oz. industrial grade rip-stop poly that is ultra-violet ray treated on both sides to prevent sunlight from deteriorating the cover. Rip-stop poly means if you get a tear in the cover, the rip will not continue. Only MDM Rhino Shelter outdoor storage shed / portable garage kits fabric is flame resistant and meets California fire code CPAI-84. Many of our customers run heat inside their shelter to keep warm while working in their workshop.

Frame: The frame on your outdoor storage shed - portable garage is made of high quality galvanized structural steel tubing that is designed not to rust. Most other manufacturers powder coat their steel, which is basically a cheap way to cover black raw pipe and make it appear galvanized. Powder coating, once chipped or scratched, may rust within 24 or 48 hours. The storage shed frame is also pre-drilled and is assembled with carriage bolts so that there are no power tools required during assembly. Average installation time on the one car garage kit is 2 hours with two people the first time setting it up. The heavy duty, galvanized steel frame is designed to withstand high winds and snow.

Anchors: We use a cable hook anchoring system to anchor your outdoor storage shed. each anchor is 3 feet long and the cable is made of stainless steel to prevent rusting. Each anchor has a 1200 pound pull out ratio.

Questions: Call us 1 888 814-7531

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design - all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with
  • Bottom Pockets
  • One (1) complete Roll-up Door Kit
  • Protective Plastic Tube End Caps - All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & DoorsTwenty-Two (22) permanent anchors included
  • Five(5) Box Shipment
  • Average install time - 8 to 10 hours
*
*
*
Filters
Sort
display